| How it Works: | The combination switch consists of a moving contact (moving contact piece), a static contact (static contact piece), a rotating shaft, a handle, a positioning mechanism and a housing. The moving contacts and static contacts are respectively stacked between several layers of insulation pads, and each is attached with a terminal connecting the line. When the handle is turned, the moving contact of each layer rotates with the square rotating shaft, so as to realize the circuit on and off control. There are 3 pairs of static contacts in the interior of the combination switch, respectively separated by 3 layers of insulation board, each attached to the wiring pile connecting the line, 3 moving contacts are insulated from each other, corresponding to their own static contacts, set on the common insulation rod, one end of the insulation rod is equipped with an operating handle, the handle rotates 90 degrees each time, you can complete the opening and closing or switching between the 3 groups of contacts. The switch is equipped with a quick breaking spring to accelerate the breaking speed of the switch. The combination switch refers to a switch that is often introduced as a power supply in the electrical control line, which can be used to directly start or stop the low-power motor or make the motor reverse and reverse |
| Functions: | The car combination switch is a combination of some parts of the car equipment, and it is a multi-functional combination switch, and the car combination switch is a motor control line, a switch often introduced as a power supply, can be used to directly start or stop the small Gree motor or make the motor rotate positively and negatively. Therefore, the automobile combination switch also plays the corresponding role of starting and closing the power switch equipment. And the car combination switch is usually installed on the steering column under the steering wheel, there are left and right sides for control, and this is to facilitate the driver to use and operate the car combination switch is a switch, its use is mainly used for electrical equipment through the electrical control system connected to each other, and then to achieve different function conversion and open and close, And the combination switch has a series of roles such as lighting switch, warning, light signal, and the applicable environment in the day and night as long as the combination switch is needed, the car block switch can play a corresponding role. Car combination switch has certain action characteristics, such as the gear characteristics, the gear is only divided into several levels of the force is different, as well as the characteristics of the conversion force and speed characteristics, speed characteristics is the equipment controlled after the switch, there is a corresponding fast and slow speed competition, and even anti-interference ability, anti-interference ability can choose to open the wiper, This is what can be anti-interference, because sometimes rain will affect the windshield to affect their own things, so to turn on this to prevent interference. Car combination switch is often used, and used in the dark, in fact, the main switch is particularly many, so for the car combination switch, we must maintain a good state, protect the use of car trigger switch, especially the car combination switch, sometimes failure and other situations, this time it is necessary to check or replace in time, This helps the driver with some safety features while driving. |
